The 100m roll of 2.5mm² solid copper wire with PVC insulation, rated at 450/750V, is a reliable and practical electrical wiring product, widely applicable to various civil, commercial and light industrial scenarios.​ Its core conductor is made of high-purity solid copper. The cross-sectional area of 2.5mm² endows it with excellent current-carrying capacity, which can stably transmit electricity, reduce energy loss when current passes through, lower the risk of heating caused by overload, and ensure the safe operation of the circuit. The solid copper conductor not only has excellent conductivity, but also has strong mechanical strength, resistance to stretching and bending, is not easy to break during installation, and can adapt to complex wiring environments. At the same time, the surface of the copper conductor has undergone special treatment, which can effectively resist oxidation and corrosion, prolong the service life of the wire, and can maintain stable performance even in humid, dusty and other environments.​ The insulation layer is made of high-quality polyvinyl chloride (PVC) material, which has excellent insulation properties, can reliably isolate current, and prevent potential safety hazards such as electric leakage and short circuit. PVC material also has good flame retardancy. When exposed to fire, it burns slowly and produces little smoke, adding a layer of safety protection to the circuit. In addition, the insulation layer is wear-resistant and chemical corrosion-resistant, can withstand a certain degree of mechanical impact and temperature changes, and has a wide applicable temperature range. It can work normally in the environment of -15℃ to 70℃, and is competent for exposed laying, concealed embedding or pipe threading.​ The voltage rating of 450/750V means that this wire can be used in circuit systems with an insulation voltage of 450V to ground and 750V between lines, and is suitable for main lines and branch lines in family residences, lighting and power systems in commercial places, power supply for small office equipment and other scenarios. For example, in families, it can be used to connect the lines of high-power household appliances such as air conditioners and electric water heaters; in shops, it can provide stable electricity for equipment such as freezers and display cabinets. The 100m roll design is convenient for construction personnel to cut according to actual needs, reducing waste, and at the same time facilitating transportation and storage.​ This product is produced in strict accordance with relevant industry standards. Every link from raw material selection to finished product inspection is strictly controlled to ensure that its electrical performance, mechanical performance and safety performance meet the regulatory requirements. Whether in home decoration, commercial decoration or small engineering projects, this 2.5mm² solid copper PVC insulated wire is a trustworthy choice, which can provide stable and safe power transmission support for various electrical systems.

The 70mm² green/yellow earth cable (stranded bare copper, 90°C PVC insulated, 100m roll, for heating/grounding) is a cable specially designed for safe grounding and high-temperature heating environments. With its excellent conductivity, high-temperature resistance, and clear identification, it plays a key role in ensuring the safety of electrical systems and grounding of high-temperature equipment.​ In terms of specification parameters, the conductor cross-sectional area of this cable is 70mm², adopting a stranded bare copper structure, which is composed of multiple strands of fine copper wires twisted together. It not only has excellent conductivity, with a maximum conductor resistance of no more than 0.268Ω/km at 20°C, which can quickly conduct current into the ground to ensure grounding safety, but also has good flexibility, facilitating bending and laying in complex installation environments. The insulation layer is made of 90°C high-temperature resistant PVC material with a thickness of about 2.0-2.5mm, which can maintain stable insulation performance in high-temperature environments. The insulation resistance is greater than 100MΩ·km at room temperature, effectively preventing leakage and short circuits. The rated voltage of the cable complies with relevant grounding specifications and is mainly used for grounding loops in low-voltage systems. Its appearance is green and yellow alternately, which is an internationally accepted grounding identifier, clearly distinguishing it from other functional cables and avoiding wiring errors. Each roll is 100 meters long, meeting the grounding wiring needs of most projects and facilitating transportation and storage.​ In terms of characteristic uses, this cable has important applications in many fields. In power systems, it can be used as a grounding branch for distribution devices, transformers, switch cabinets and other equipment, connecting the equipment shell to the grounding grid. When the equipment leaks electricity, it can quickly conduct the fault current into the ground, protecting the safety of personnel and equipment. In industrial heating equipment, such as industrial electric furnaces, drying kilns, heat treatment equipment, etc., due to the high temperature when the equipment is running, its metal shell needs reliable grounding. The high-temperature resistant insulation layer of this cable can adapt to the high-temperature environment around the equipment, ensuring that the grounding remains effective. In building electrical, it is suitable for lightning protection grounding, protective grounding and working grounding of buildings, such as connecting lightning rods, grounding electrodes with building steel bars to form a complete grounding system, enhancing the lightning protection capability of buildings. In the new energy field, such as photovoltaic power stations and wind farms, it can be used as a protective grounding cable for equipment to ensure the safe operation of power generation equipment in harsh environments. In addition, in large public places such as subways and airports, its clear green-yellow identification and reliable grounding performance can provide safety guarantees for complex electrical systems.​ In terms of materials, the conductor is made of high-purity bare copper with a purity of more than 99.9%. High-purity copper ensures excellent conductivity, which can quickly conduct fault current and reduce grounding resistance. The bare copper stranded structure gives it good mechanical strength, which can withstand a certain amount of tension and pressure and is not easy to break. The insulation layer is made of 90°C high-temperature resistant PVC material, added with heat-resistant stabilizers and flame retardants. It can not only withstand high temperatures but also has certain flame retardancy. It burns slowly when exposed to fire and can self-extinguish after leaving the fire source, improving safety. The green-yellow insulation layer uses special color masterbatches, with bright and durable colors that are not easy to fade, ensuring that the grounding function can still be clearly identified during long-term use.​ In terms of production process, the cable is made through strict procedures. First, high-purity copper rods are drawn into fine copper wires, which are annealed to enhance flexibility; then multiple strands of copper wires are twisted according to specific processes to form 70mm² conductors, ensuring uniform and tight twisting; then the extrusion process is used to wrap heat-resistant PVC material around the outer layer of the conductor, and at the same time, green-yellow color masterbatches are introduced to form a uniform insulation layer; then high-temperature aging test is carried out, placing the cable in a 90°C environment to test the performance stability of the insulation layer; then the spark test is used to detect whether the insulation layer has pinholes and other defects; finally, the qualified cables are rolled into 100-meter rolls, and appearance and performance spot checks are carried out to ensure product quality.​ In terms of general information, the packaging uses hard paper tubes or plastic reels, and the outer layer is wrapped with moisture-proof plastic film to prevent moisture and damage during transportation and storage. Avoid violent collision and exposure to the sun during transportation to prevent damage to the insulation layer. Each roll of cable is strictly inspected before shipment to ensure that the length, appearance and performance meet the standards. Manufacturers can provide samples for customers to test and confirm. In terms of after-sales service, a 1-3 year warranty period is provided. If the grounding fault is caused by product quality problems, the manufacturer will be responsible for repair or replacement. The professional technical team can provide installation guidance and suggestions for grounding resistance testing.

12 AWG THWN-2 copper wire is an ideal choice in the field of building wiring, and its design fully meets the stringent requirements of building electrical systems. This wire adopts 7-stranded high-purity electrolytic copper conductors, with precise diameter of single-strand copper wires. The stranding process ensures overall flexibility and mechanical strength, enabling it to easily cope with complex construction scenarios such as wall pipe threading and ceiling wiring, reducing damage caused by bending or pulling. With a rated voltage of 600V, it perfectly adapts to building low-voltage distribution systems and can meet various power demand such as lighting, sockets, and small power equipment.​ In terms of performance, this wire performs excellently. Its cross-sectional size is approximately 3.31mm², with a current-carrying capacity of 30A in a dry environment at 90℃ and 25A in a humid environment at 75℃, which is sufficient to support the stable operation of high-power household appliances such as air conditioners and electric water heaters. The insulation layer is made of high-quality PVC material, with an insulation resistance of ≥100MΩ·km, and has passed the UL standard voltage withstand test, which can effectively block current and prevent electric leakage and short-circuit accidents. The outer nylon sheath further enhances wear resistance and tear resistance, making it less likely to be damaged when in contact with building materials or during pipe threading. It also has good moisture resistance and chemical corrosion resistance, adapting to humid environments such as kitchens and bathrooms, as well as complex scenarios such as auxiliary areas of industrial plants.​ The "THWN-2" identifier clearly demonstrates its core advantages: "T" stands for thermoplastic insulation, "H" means high temperature resistance, "W" indicates moisture resistance, "N" is nylon sheath, and "2" indicates that it can withstand a working temperature of 90℃ in a dry environment and 75℃ in a humid environment, far exceeding the temperature resistance of ordinary wires. Coupled with UL certification, it not only complies with domestic building codes but is also suitable for foreign-related projects with strict quality requirements.​ The 100-meter roll design is convenient for construction management, reducing the number of wiring connections and improving efficiency. Whether it is the lighting and socket circuits in residences, the power supply for office equipment and emergency lighting in commercial buildings, or the control circuits and small motor connections in auxiliary areas of industrial plants, 12 AWG THWN-2 copper wire can provide reliable guarantees for building electrical systems with its stable performance, excellent safety, and wide adaptability, making it the preferred wire for building wiring.

Yellow-Green Copper Core PVC Insulated Grounding Cable: Safety-Centric Power Protection​ This premium grounding cable series, available in 35mm² and 50mm², stands as a critical safety component for electrical systems, featuring a high-purity copper core and robust PVC insulation in the globally recognized yellow-green color scheme. Engineered to divert fault currents safely into the ground, these cables minimize risks of electric shock, equipment damage, and fire hazards across residential, commercial, and industrial settings.​ The copper core, crafted from electrolytically refined copper, ensures exceptional conductivity—essential for rapid dissipation of fault currents. This material’s natural corrosion resistance guarantees long-term performance, even in humid or chemically exposed environments, while its stranded structure enhances flexibility for easy routing through tight spaces, conduits, or complex machinery layouts.​ Encased in flame-retardant PVC insulation, the cable withstands temperatures from -15°C to 70°C, making it suitable for both indoor and outdoor installations. The yellow-green coloring adheres to international safety standards (IEC, NEC), enabling instant identification to prevent misconnection—a common cause of grounding failures.​ The 35mm² variant excels in commercial and light industrial applications, such as grounding distribution panels, large appliances, and medium-duty machinery. The 50mm² cable, with higher current-handling capacity, is tailored for heavy-industrial use, including power generation facilities, renewable energy systems, and high-voltage equipment. Both models comply with global certifications, ensuring seamless integration into diverse electrical codes.​ Reliable, durable, and safety-focused, this grounding cable series delivers peace of mind, proving indispensable for maintaining electrical system integrity.

Summary of Pure Copper THHN Wire Cable 200mm² Stranded Conductor PVC Insulated 600V Rated Voltage​ The Pure Copper THHN Wire Cable with 200mm² stranded conductor, PVC insulation, and 600V rated voltage stands out as a high-performance and reliable solution for a wide range of electrical wiring applications. Crafted with premium pure copper, the stranded conductor delivers exceptional electrical conductivity, ensuring efficient current transmission with minimal power loss— a critical advantage for both residential, commercial, and industrial settings where consistent energy flow is essential. The 200mm² conductor cross - sectional area is specifically designed to handle high current loads, making it suitable for heavy - duty electrical systems such as those in large manufacturing facilities, commercial buildings with high power demands, and industrial machinery that requires stable power supply.​ The PVC insulation surrounding the conductor is a key feature that enhances the cable's durability and safety. PVC (Polyvinyl Chloride) is well - known for its excellent resistance to heat, chemicals, and abrasion. This insulation can withstand moderate to high temperatures, ensuring the cable maintains its structural integrity and electrical performance even in environments with fluctuating temperatures, such as near heating equipment or in outdoor installations exposed to sunlight. Additionally, the PVC material provides effective protection against common chemicals found in industrial settings, preventing insulation degradation that could lead to electrical faults. It also offers good abrasion resistance, reducing the risk of damage during installation or when the cable comes into contact with other materials, thus extending the cable's service life.​ With a rated voltage of 600V, this THHN wire cable meets the voltage requirements of most low - to - medium voltage electrical systems. It complies with relevant industry standards and certifications, guaranteeing its safety and reliability for use in various applications. Whether it is used for wiring in commercial office buildings to power lighting, HVAC systems, and office equipment, or in industrial plants to connect heavy - duty machinery and electrical panels, this cable ensures stable and safe electrical operation.​ Moreover, the stranded conductor design of the cable provides enhanced flexibility compared to solid conductor cables. This flexibility makes the cable easier to handle, bend, and install in tight spaces or along complex routing paths, reducing installation time and labor costs. It also minimizes the risk of conductor breakage due to bending or vibration, further improving the cable's long - term reliability.​ In summary, the Pure Copper THHN Wire Cable 200mm² Stranded Conductor PVC Insulated 600V Rated Voltage combines superior electrical performance, durability, safety, and flexibility. It is an ideal choice for a diverse range of electrical wiring projects, from commercial and industrial applications to specific residential uses that require high - current capacity and reliable operation. Its compliance with industry standards and high - quality materials ensure that it delivers consistent performance and long - term value, making it a trusted solution for electrical professionals and project managers.

Summary of THW-2-LS/THHW-LS 600V 90C Copper Wire (14AWG to 2/0AWG)​ The THW-2-LS/THHW-LS Copper Wire, rated at 600V and 90°C with wire gauges ranging from 14AWG to 2/0AWG, stands as a versatile and high-performance electrical solution tailored for diverse residential, commercial, and light industrial applications. Crafted with high-quality copper conductors, this wire delivers exceptional electrical conductivity, ensuring efficient current transmission with minimal power loss—a critical advantage for systems requiring stable energy flow, from household circuits to commercial lighting and light machinery.​ The 600V rated voltage makes it suitable for low-to-medium voltage electrical systems, covering most daily and commercial power needs, while the 90°C temperature rating enables safe operation in environments with moderate heat, such as near heating equipment, enclosed electrical boxes, or commercial spaces with high ambient temperatures. This heat resistance prevents insulation degradation and ensures long-term reliability, even under continuous use.​ Available in multiple gauges (14AWG, 12AWG, 10AWG, 8AWG, 6AWG, 2AWG, 1AWG, 1/0AWG, 2/0AWG), the wire offers flexibility to match specific current-carrying requirements. Smaller gauges (14AWG-10AWG) are ideal for residential wiring, such as powering outlets, lighting, and small appliances, while larger gauges (8AWG-2/0AWG) handle higher currents for applications like HVAC systems, commercial equipment, and light industrial machinery.​ The “LS” (Low Smoke) feature in both THW-2-LS and THHW-LS variants adds a safety layer: in case of fire, the wire emits minimal smoke, reducing health risks and improving visibility for emergency response—making it suitable for enclosed spaces like apartments, offices, and public buildings. The durable insulation (compliant with THW-2 and THHW standards) resists moisture, abrasion, and common chemicals, protecting the copper conductor from external damage and ensuring long service life, even in damp or harsh installation conditions.​ In summary, the THW-2-LS/THHW-LS 600V 90C Copper Wire combines conductivity, safety, and versatility. Its wide gauge range, heat and voltage tolerance, and low-smoke design make it a trusted choice for electrical professionals, ensuring compliance with industry standards and reliable performance across various applications.